MaxiPod
MaxiPod Thermal Storage Systems work by reversing the function of the Primary (Heating) and Secondary (Domestic) waters. The Primary water is stored in the cylinder and heated by either a boiler or immersion heaters. When heated by a boiler, the water can also be pumped around the radiators to provide space heating.
The Secondary water comes directly from the mains and passes through a specially designed heat exchanger which draws heat from the MaxiPod.
This water then passes through a thermostatic mixing valve which blends it to the correct temperature before it reaches the taps.
- Comes with immersions fitted
- Comes 22mm mixing valve & thermometer fitted
- Ideal for multi-fuel situations, solar, solid, gas, oil, electric boiler etc.
Why choose MaxiPod?
- Vented mains pressure
- Instant hot water and heating
- Energy efficient, reducing running costs
- No annual maintenance/service
- Simple and easy to install
- No attic pipes to freeze
- Fresh water at hot and cold taps
- Suitable for multi-fuel situations
The advantages of a MaxiPod
- Tried and tested materials
- Proven to be safe and healthy in the home
- Long life span
- 100% recyclable, which benefits the environment
Supplied as standard with all MaxiPod units:
- Servicable Strainer
- Non-Return Valve
- Expansion Chamber
- Thermostatic Mixing Valve
- Connecting Pipework
- Double Thickness CFC Free Insulation
- Temperature Gauge
- 2 Immersion Heaters Fitted (Electric Model Only)
- Probe-type Cylinder Thermostat (Boiler Model Only)
- Isolating Valve, Ballvalve, Copper Float and Overflow (Combination Units Only)
MaxiPod sizing guide
| Model | 120 | 140 | 180 | 210 | 250 |
|---|---|---|---|---|---|
| Boiler Model - Bedrooms | 1-2 | 1-3 | 2-4 | 3-5 | 4-6 |
| Boiler Model Baths & Showers | 1 or 1 | 1+1 | 2+1 | 1+3 or 2+2 | 2+4 or 3+2 |
| Heating Load Maximum (kW) | 11 | 13 | 16 | 19 | 23 |
| Hot Water Allowance (kW) | 4 | 5 | 6 | 7 | 9 |
| Electric Model Bedrooms | 1 | 1-2 | 1-3 | 2-3 | 2-4 |
| Electric Model Baths & Showers | 0+1 | 1+1 | 1+2 or 0+3 | 1+2 | 2+2 or 1+3 |
| Combination Unit (Height x Diameter) (mm) | 1130 x 450 | 1250 x 450 | 1500 x 450 | 1700 x 500 | 1700 x 500 |
| Cylinder (Height x Diameter) (mm) | 900 x 450 | 1050 x 450 | 1300 x 450 | 1500 x 450 | 1500 x 500 |
| Flow Rate Hot Water (l/m) | 35 | 35 | 35 | 35 | 35 |
- Smaller and larger units available
- Different heights and diameters available
- Connections can be positioned to suit installation
- Simple and easy to install
- No maintenance required
- Flow rates based on 35ēC. Higher flow rates available
Supplied as standard with all MaxiPod units:
- Servicable Strainer
- Non-Return Valve
- Expansion Chamber
- Thermostatic Mixing Valve
- Connecting Pipework
- Double Thickness CFC Free Insulation
- Temperature Gauge
- 2 Immersion Heaters Fitted (Electric Model Only)
- Probe-type Cylinder Thermostat (Boiler Model Only)
- Isolating Valve, Ballvalve, Copper Float and Overflow (Combination Units Only)
Options with MaxiPod units:
- Immersion Heater Supplied with Boiler Model
- Extra Coils, Connections, Immersions, Higher Flow Rates
- Double Pump Kit (fitted): Two 15-50 circulating pumps pre-wired with the cylinder thermostat to a wiring centre, with the programmer supplied separately
- Emergency electrical back-up system (3, 6 or 9kW)
- White Cased Finish
Manufacturers of Domestic and Industrial Hot Water Stainless Steel & Copper Cylinders.
Copper Industries (Ireland) Ltd.Toome Business Park,
21 Hillhead Road, Toome
Co. Antrim, BT41 3SF
From N. Ireland:
T: 028 7965 9736
F: 028 7965 0000
From ROI:
T: 048 796 59736
F: 048 796 50000
Email: info@copperindustries.co.uk
In the interests of continued improvement the manufacturers reserve the right to change the specifications and design without due notice.
